|
X-10 PHR02 16 Channel Remote Control
Description:
Lets you control up to 16 lights and appliances remotely when used with X10 RF base
receivers.
Has dim and brighten control for incandescent lighting.
Requires any X10 Transceiver (TM751 or RR501) - Sold with transceivers or base stations
included in award-winning home automation and security kits like ActiveHome (CK11A)
Protector plus (DS7000) and Monitor Plus (DS8700)
PDF
Installation Instructions
Features:
- Battery operated
- RF transmission
- 100 Foot range
- 16 unit control.
The Home Automation RF Remote works with either an X-10 PRO
Security System, such as the PR02000 or with a Transceiver Module (PAT01)to provide remote
control of lights and appliances from anywhere in the house.
Setting up the Home Automation Remote
Set the codewheel on the Home Automation Remote to the same House Code
as the Security
System or the Transceiver Module (PAT01).
Fit four AAA Alkaline batteries in the battery compartment in the back
of the remote.
Set the slider switch on the Home Automation Remote to 1-8 to use the
ON/OFF buttons to control the first eight Unit Codes, or 9-16 to control the next eight
Unit Codes.
Note: It is not necessary to register the Home Automation remote
with the security system.
Note: As with all RF transmitter devices; electrical fields, metal
doors and appliances can cause interference that can decrease the strength of the
transmitted signal. Re-orienting the transmitter or receiver console and antenna may
increase your ability to send and receive the necessary signals. The receiver should be
mounted as high as possible for best reception.
|
