|
X-10 3-Way With 2nd Wireless Switch Kit
Convert Any Single Switch Wo A 3 Way Switrch In No Time With 2 Extra X-10
Switch's For Additional Lighting At THe Wireless Remote Switch
Kit Includes:
1-PAT01 Universal Base Tranciever. This Unit Makes Your House X-10 Ready. It Sends The
Signals Through Your Elec.
1-PHW04D 3 Way Wireless Switch, With 3 Selections and Dimming.
1-PLW01 Single Gang Wall Switch In White.
You Save $10.00 With This Kit VS Buying Parts Seperatly.
PAT01 Universal Base Tranciever.
- Wireless Transceiver Module (TM751)
The wireless transceiver module is an integral part of your home control system.
It takes radio frequency commands from X10 remote controls and wireless motion sensors and
converts them to X10 signals carried over household wirin
The TM751 allows you to control any household appliance or light that is connected through
a lamp or appliance module to your household wiring.
Set up your own home network and make your home work for you!
The wireless transceiver module also functions as an appliance module. Simply plug an
appliance into it and you have full control over that appliance!
Note: For larger X10 systems - you will need 1 Transceiver per house-code setting.
For example: If you have all your interior lights on House Code A - all your exterior
lights on House Code B - and all your wireless cameras on House Code C you would need 3
Transceivers.
Simply set each transceiver to its corresponding House Code.
For smaller X10 systems - you can have your cameras and lights on one house code (ex.
House Code A) and would only need one Transceiver.
X-10 PHW04D Wireless Wall Switch With NO Wiring Needed
Put a Lightswitch Anywhere!
Upgrade with this decorative & powerful wall switch
- Have you ever wanted a light switch in a certain location,
but didn't want to rip a hole in a wall and connect electrical wires? Now X10 has come to
the rescue with the ALL NEW Ultra-slim Stick-a-Switch wireless wall switch! Easy single
push-button programming has your Stick-a-Switch set for each button to control a different
lamp or appliance!
- Lightweight,
sleek and slender designer style!
- Adheres to
any surface!
- Your dream
switch, in the perfect location!
- Control Up
To 3 Devices With Dimming Features, Or Appliance Modules Also, All X-10 Devices.
The Wireless RF Wall Switch works with either an X-1 0 PRO Security
System, such as the X-10 PR02000, or with a Transceiver Module PAT01, to provide remote
control of lights and appliances from anywhere in the house. It is designed to be mounted
in any location using either the supplied double-sided tape or
Velcro.TM
PDF Installation Instructions
- Installation And
Operating Instructions
The PHW04D works with the RF Base Transceiver (PAT01) or an X-1 0 PRO
Security Receiver (PR02000) giving you ON/OFF control of three individually coded X-1 0
PRO Modules and Brighten/Dim of lights connected to Lamp Modules or Wall Switch Modules.
In the default state (after first fitting the battery) the PHW04D is set to Housecode A.
The top three ON/OFF rocker keys control modules set to Unit Codes 1,2,3. The bottom
rocker key Brightens and Dims lights connected to Lamp and Wall Switch Modules.
Setup
1. Plug in an X10 PRO RF Base Transceiver (PAT01 sold separately).
2. To turn On/Off X10 PRO Modules set to Unit Codes 1,2, or 3 (on
Housecode A) press the Jeftor right side of the first, second or third rocker key. To
Brighten/Dim Lamp Modules or Wall Switch Modules press the Unit button first, then press
and hold the left or right side of the bottom rocker key.
3.Attach the PHW04D to awall using doublesided tape or Velcro .lf you
want to control Modules 1, 2 and 3 on Housecode A, you don't need to readany further.
To change the Housecode
Press and hold the first (top) ON rocker key.
The red LED flickers.
3 seconds later, the LED blinks the current setting: 1 blink for
Housecode A, 2 blinks for B 16 blinks for P.
· Release the first (top) ON rocker key.
· Press and release the first (top) ON rocker key the appropriate
number of times for the House Code you want to-set.
Once for A, twice for B, etc. The lED-blinks-for-each press.
IMPORTANT: Hold the button on your last press. 3 seconds later,
the red LED blinks back the new setting, e.g. 3 blinks for Housecode C. If you do not
follow this programming sequence, the LED will stay on for 1 second and your existing
setting will not be changed.
To change the Unit Code:
For the first (top) rocker key (the second and third rockers are always
one # higher than the first).
IE. If you set the first rocker key to 6, the second rocker key
controls 7, and the third control 8, etc..
Press and hold the top OFF rocker key. The red LED flickers. 3 seconds
later, the LED blinks the current setting: 1 blink for Unit Code 1, 2 blinks for 2, 16
blinks for 16.
Release the top OFF rocker key.
Press and release the top OFF rocker key the appropriate number of times
for the Unit Code you want. IMPORTANT: Hold the key on your last press. 3 seconds later
the new code blinks back. If you do not follow this programming sequence, the LED will
stay on for 1 second and your existing setting will not be changed.
To change battery:
Open battery holder on bottom of unit, and fit a CR2032 Lithium 3V
battery. Observe polarity.
Note: As with all RF transmitter
devices;electrical fields, metal doors and appliances can cause interference that can
decrease the strength of the transmitted signal. Reorienting the transmitter or receiver
console may increase your ability to send and receive the necessary signals.
PLW01 Pro Wireless Light Switch With Dimming
- Description:
- Upgrades your existing standard single pole
wall switches.
For automation of indoor/outdoor lights including front porch-patio-Hallway-and stairway
lights.
- Features:
Rated at 500W (incandescent).
Dimmable through X10 controllers.
|
