| Sentrol 5885 Acoustic Glass Break &
40 X 40 Motion |
Description
The ShatterPro Plus is an acoustic glassbreak
sensor combined with a passive infrared motion detector (PIR) for the purpose of
eliminating occupant-generated false alarms. It will extend acoustic glassbreak technology
to occupied areas, allowing these sensors to be armed while people or pets are present.
The ShatterProTMPlus can be wired into a 24-hour perimeter loop,
free from concerns about false alarms generated by a noisy environment.
Installation Manual
Features and Benefits
- High-Quality ShatterPro II analysis combined with Sentrol motion
signal analysis
- Motion-sensitive eliminates occupant generated false alarms
- 24-hour acoustic glassbreak application
- Two-relay output for arming either perimeter or interior loop or both
- Can function as two sensors in one package (PIR/Glassbreak)
|
|
Specifications
Electrical
Operational voltage..................................................9 to
16 VDC
Current draw.......................................15mA typical, 30 mA
max.
Alarm outputs......Normally closed, open 4 seconds on alarm
On resistance...........................................5 to 15 Ohms
Off resistance..............................................>1 MOhms
Maximum loop rating
(relay or tamper loop)..........................16 VDC, 50 mA
Fails safe and opens on power loss
Wire gauge
...............................................................14 - 22 AWG
Environmental
Lightning suppression....................400 watts for 1 msec pulse
Operating temperature............0° F to 120° F (-18° C to +50° C)
RFI immunity..............................20 V/meter from 1 to 1000MHz
Humidity.........................................10% to 90% noncondensing
Dimensions
PIR Features
Pulse count................................Bi-directional, 1 zone (2
pulses) with Motion Verification
Range
1. Wide Angle (90 ° )....................................30’ x 30’
(9.1m x 9.1m) 7’ (2.1 m) mounting height
2. 360 ° Ceiling ..........15’ x 20’ (4.6 m x 6.1 m) at
8’ (2.4 m) height 16’ x 30’ (4.9 m x 9.1 m) at 12’ (3.7 m) height
Ceiling mounting height up to 12’ (3.7 m)
3. Single Spot.....40’ (12.2 m) range, 7’ (2.1 m) mounting
height
4.Vertical Barrier..40’ (12.2 m) range, 7’ (2.1 m) mounting
height
5. Pet Alley (90 °)..30’ (9.1 m) range, 3’ (0.9 m) mounting height
Acoustic Glassbreak Features
Microphone...................................Omni directional 360 ° electret
Sensitivity
setting........................................................Factory set
Range..............................12’ (3.7 m) from ceiling to window
wall 12’ (3.7 m) to side wall
Glass types detected:
Plate glass.....................1/8" (3.2 mm) to 1/4" (6.4 mm)
Tempered glass.............1/8" (3.2 mm) to 1/4" (6.4 mm)
Wired glass.............................................. 1/4" (6.4
mm)
Laminated glass....................................... 1/4" (6.4 mm)
Mounting location.....Ceiling or any wall except opposite wall
Minimum distance from
glass........................................3.3’ (1 m)
Minimum glass size......................................1’ (0.3 m) x
2’ (0.6 m)
Dimensions.............................................................3.7"
(9.4 cm) H 2.2" (5.6 cm) W 1.2" (3.1 cm) D
Housing material............................Flame retrardant ABS plastic
Color.............................................................................White/white
Shunting feature.........Glassbreak automatically turns back on 1 minute
after vacating PIR’s field of view
|
