|
Description
Receives and retransmits signals from Learn Mode sensors - touchpads - and other Repeaters
to increase the distance a sensor can be mounted from the control panel.
Ideal for large installations where:
1) distant sensors perform poorly on the sensor test
2) distant sensors cause supervisory problems or
3) control panel antennas are shielded by metal.
Features
Can be programmed to repeat specific sensors - touchpads and repeaters
Dual-antenna receiver for improved sensor data reception
AC power failure option
Supervisory reports every 64 minutes
Tamper switch
600 Foot typical open-air range
Main power supplied by: 15-16.5 VAC - 2 VA transformer (required if backup battery is
used) - or 9-16.5 VAC - 2 VA transformer - or
Transformer And Battery Not Included. Normally Not Needed.
You Have To Power It From Your System.
Please Call If You Need Trans Former And Battery.
12 VDC power supply Usually Powered From Your Concord System.
24-hour backup with 12 VDC - 1.3 Ah lead-acid battery
Crystal-controlled superheterodyne radio receiver
40°-120°F operating temperature
Specifications
Color: White
Dimensions: 4.125 Inch wide X 5.25 Inch high (+8.75 Inch with antennas) 1 Inch deep
|
