Concord 4 80-953-4 Kit With LCD
Keypad Transformer
Concord 4 Series Control
Panels
GE Concord 4 LCD Kit
Kit Includes:
1-Concord 4 Control
1-ATP 1000 Flip Down Door Keypad
1-16VAC 40 VA Regular Transformer
1-RJ Jack And Cord 1-All Manuals
600-1124 X-10 Transformer needed For X-10 Lighting Control To Work - Not Included
12V 8AH Battery - Not Included
See Related Products Below
Installation
Manual
User Manual
Spec Sheet
Cross
Reference
Automation
Protocol
Concord 4 is a full-featured security system for intrusion and
fire detection that complies with SIA CP-01 false alarm
standards. Easy to install and simple to use, Concord's modular
design and advanced software provide outstanding system
flexibility to meet the needs of virtually any residential or
commercial security application.
High standards
The panel comes standard with eight hardwire zone inputs,
including a 2-wire smoke detector loop that can handle up to 20
detectors. A built-in RF receiver with 96-zone capacity provides
instant compatibility with the complete line of GE Security
Learn Mode sensors. Two programmmable outputs can be set up to
activate external devices during an alarm or other system event.
Easy expansion
Expands Concord's capabilities by adding SuperBusR 2000 8z Input
Modules for eight additional zones per module, or SuperBus2000
4-Relay Output Midules to add four more output points.
SnapCardsTM also add to system zone inputs and outputs. Each
card (one per panel) connects easily to the panel circuit board
inside the cabinet for a clutter-free, professional
installation.
Increase RF coverage area by adding up to four SuperBus 2000 RF
receivers or SuperBus 2000 RF transceivers. Each receiver
supports all 96 zones.
Expand the system even further with a Phone Interface/Voice
Module for on- and off-site system control using touch-tone
phones. The module includes a speaker output that provides
on-site voice status and alarm messages.
Adding a SuperBus2000 Energy Saver Module lets users control
heating and air conditioning. The Power Line Carrier Power
Transformer adds X10 light control. The Wireless Gateway Module
allows users to control and monitor the status of the system
from the Alarm.com web site.
Increase power capability for system peripheral with a SuperBus
2000 2-amp Power Supply Module with battery backup. The module
provides 2 amps at 12 VDC.
Standard Features
- Six partitions and eight built in hardwire zones - 96 zones
maximum as either hardwire, wireless, or combination
- 96 wireless zones standard onboard
- Two onboard programmable outputs
- Compatible with all GE Security crystal and SAW Learn Mode
sensors
- SIA CP-01 False Alarm Reduction Standard compliant
- 2- and 4-wire smoke detector compatibility
- Panel auxiliary power provides 1 amp
- Built-in-12-watt siren driver
Product:
Concord 4 Series Control Panels
Description:
Concord 4 is a full-featured security system for intrusion and fire
detection that complies with SIA CP-01 false alarm standards. Easy to
install and simple to use, Concord's modular design and advanced
software provide outstanding system flexibility to meet the needs of
virtually any residential or commercial security application.
High standards
The panel comes standard with eight hardwire zone inputs, including a
2-wire smoke detector loop that can handle up to 20 detectors. A
built-in RF receiver with 96-zone capacity provides instant
compatibility with the complete line of GE Security Learn Mode sensors.
Two programmmable outputs can be set up to activate external devices
during an alarm or other system event.
Easy expansion
Expands Concord's capabilities by adding SuperBusR 2000 8z Input Modules
for eight additional zones per module, or SuperBus2000 4-Relay Output
Midules to add four more output points. SnapCardsTM also add to system
zone inputs and outputs. Each card (one per panel) connects easily to
the panel circuit board inside the cabinet for a clutter-free,
professional installation.
Increase RF coverage area by adding up to four SuperBus 2000 RF
receivers or SuperBus 2000 RF transceivers. Each receiver supports all
96 zones.
Expand the system even further with a Phone Interface/Voice Module for
on- and off-site system control using touch-tone phones. The module
includes a speaker output that provides on-site voice status and alarm
messages.
Adding a SuperBus2000 Energy Saver Module lets users control heating and
air conditioning. The Power Line Carrier Power Transformer adds X10
light control. The Wireless Gateway Module allows users to control and
monitor the status of the system from the Alarm.com web site.
Increase power capability for system peripheral with a SuperBus 2000
2-amp Power Supply Module with battery backup. The module provides 2
amps at 12 VDC.
Auxilary Power (VDC @ mA) 12.0 V @ 1.0 A
Battery Backup
12 VDC, 4.5 Ah or 7 Ah rechargeable, sealed, lead-acid
Battery Backup time
24 hours (when fully charged, with appropriate external load)
Battery Test
15 minutes under load every 24 hours (every 4 hours for UL
installations)
Capabilities
3 central station phone numbers and 5 pager phone numbers
Color
Beige
Databus Capacity
Up to 16 devices
Databus Format
SuperBus 2000 with auto-enrolling capability
Depth Nominal
3.0 in
Dialing Format
DTMF or pulse with integrated line seizure relay
Formats supported
SIA Digital II (300 bps) or Contact ID
Height Nominal
14.0 in
Lock set
Optional
Mounting Option
Wall mounting
Operating Humidity Maximum
90.0 % RH
Operating Temperature Minimum
32.0 °F
Operating Temperature Maximum
120.0 °F
Regulatory Approval
FCC Part 15
FCC Part 68
UL 985
UL 1023
L 1635
CUL
SIA CP-01 2000 False Alarm Prevention
Required transformer
Class II, 16.5 VAC, 40 VA, 60 Hz
Storage Temperature Minimum
-30.0 °F
Storage Temperature Maximum
140.0 °F
System Inputs (Zones) - On Board Maximum
96.0
Transformer fuse
Non-replaceable fuse
Weight Nominal
5.0 lb
Width Nominal
12.0 in
