New Page 1
| Ademco 7845CV2 Nationwide Cellular Radio This Radio can
connect you to central station nationwide.
Interfaces with all burglar alarm systems.
We must program the radio for you before we ship it.
PLEASE CALL FOR SIGN UP INFORMATION-800-309-1009
Control Channel Cellular Transceiver.
Easy to install.
See Below For Alarm System Compatibility.
By using cellular control channels - the 7845CV2 offers virtually
limitless coverage. The 7845CV2 communicates on the Cellular Network’s Control
Channel. Alarm and status packets are transmitted into the cellular network control
channel where they are identified and routed to the AlarmNet Control Center. The AlarmNet
Control Center logs status checks and routes alarms via RF to any AlarmNet equipped
Central Station anywhere in the country. There is no cellular phone call required and no
system busy conditions to deal with. It is fully supervised by AlarmNet and there is a low
fixed monthly charge for normal traffic. There is no additional hardware or software
required in Central Stations already equipped to receive AlarmNet. The transceiver
connects to most ADEMCO alarm control panel.
A security system’s most vital link — the
telephone line — is also its most vulnerable. Count on AlarmNet ... the most highly
effective alternative second line or backup to alarm transmission over phone lines. The
wireless communications service works with existing security systems to assure that alarm
signals get through — no matter what.
|
| AlarmNet-C Benefits Nationwide coverage
- Low-cost
- Quick - easy installation
- Highest level of reliability
- No busy signals or cloning
|
|
Control Channel Cellular Subscriber Transceiver
Honeywell’s 7845CV2 Control Channel Cellular Subscriber Transceiver
takes advantage of the latest advances in Control Channel Cellular design—offering
virtually limitless coverage at an affordable price.
The 7845CV2 contains an internal tamper-proof antenna for an added level
of protection.
All signals are delivered to the AlarmNet Control Center, which routes
the information to the appropriate central station. The AlarmNet Control Center is fully
redundant and monitored 24 hours a day, seven days a week.
AlarmNet has the ability to route messages using the AlarmNet “A”,
AlarmNet “M”, AlarmNet “I” and 800 plus networks; all of which provide
true redundancy and the highest reliability in message delivery.
Replaces the 7854C.
Features:
Built-in tamper proof antenna
Low cost/high reliability
Built-in indicators make installation easy
Compact size
Nationwide coverage
Multiple modes of operation
Transmission in full contact ID or ADEMCO high speed
Monthly or daily supervision
Multiple registration and programming options
Tamper protection
Backup battery included
Specifications:
Electrical
Power:
– Powered from panel @ 100mA max., if current limit mode used
– Optional 12.5VDC @ 300mA DC power pack
Backup battery:
6V, 0.5Ah rechargeable sealed lead acid battery provides four hours of battery backup
Current requirements:
– 90mA normal operation
– 400mA peak during transmission
Mechanical
Dimensions:
4" W x 6.5" H x 1.5" D
Operating Temperature:
-30° to +60° C
Humidity:
0% to 90% non-condensing
UL/CUL Listings
UL 609 - Local Burglar Alarm Units and Systems
UL 365 - Police Station Connected Burglar Alarm Units and
Systems
UL 1610 - Central Station Burglar Alarm Units
UL 1635 - Digital Alarm Communicator System Units
UL 864 - Control Units For Fire-Protective Signaling Systems
UL 1023 - Household Burglar Alarm System Units
UL 985 - Household Fire Warming System Units
CAN/ULC-S527-M87 - Standard for Control Units for Fire Alarm
Systems
CAN/ULC-S303-M91 - Standard for Local Burglar Alarm Units and
Systems
CAN/ULC-S304-M88 - Standard for Central and Monitoring Station
Burglar Alarm Units
ULC Subject C1023-1974 -Preliminary Standard for Household
Burglar Alarm System Units
CAN/ULC-S545-M89 - Standard For Residential Fire Warning System
Control Units
CSFM
FM
Accessories
7720P
Programming Tool (Really Not Required We Program It For You.)
7825-OC
Remote Antenna Kit
7720V2TR
DC Transformer (Mainly Not Needed. Runs Off Alarm System Power)
K4362
Internal Battery (included)
7626-5 / 7626-12
5' / 12' Extension Cable (For Outdoor Cone Antenna Installation)
7626-25HC
25' Extension Cable (For Outdoor Cone Antenna Installation)
7626-50HC
50' Extension Cable (For Outdoor Cone Antenna Installation)
AlarmNet Services |
AlarmNet-A |
Original AlarmNet |
Ask your provider
for the AlarmNet
Technology used
in your area |
AlarmNet-M |
Mobitex System |
AlarmNet-C |
Control Channel Cellular |
AlarmNet-i |
Internet |
|
Coverage update
www.alarmnet.com
Installation:
After the radio is powered up - the LED should be observed to
determine the optimal installation location. The installation LED will indicate signal
strength - network contact and installation suitability. The radio is wired to the panel
per wiring diagram provided with the radio. It can be installed close to or inside the
panel itself. Installing 7845CV2 within the panel may require the use of external
antenna 7825OC. The radio is mounted according to the mounting instructions
noting that the antenna must be vertical. Radio should not be mounted where it would be
obstructed by a steel structure or security doors and windows which may be pulled down at
night.
Programmable
Features:
Zone Mode:
(For Use With Any Alarm System With Burg Voltage Siren
Output.)
Panel Compatibility
ANY BRAND SECURITY SYSTEM.
ADEMCO:
LYNX - LYNXR-EN - (Using Your Own 12VDC Power Supply) .
VISTA 10SE REV-15 AND LOWER
VISTA 20SE REV-12 AND LOWER.
- 1 input:
- 2K EOL supervised configurable for either voltage or ground trip
- Zone Mode/Radio Fault Output: Open collector ground trigger (programmable for fail-safe)
- Transmits One Zone To Central Station
Serial ECP Mode:
(Reports Full Contact Id Reporting Just The Same As The
Telephone Panel Dialer.)
Panel Compatibility
ADEMCO:
VISTA 10SE REV-15 AND HIGHER
VISTA 10P
VISTA 15P
VISTA 20SE REV-12 AND HIGHER - VISTA 20P - VISTA 20PS
-VISTA 20PCN - VISTA-20SECN
VISTA 32FB
VISTA-128B VISTA-128BCN - VISTA-128BP - VISTA-128FB -
VISTA-128FBP - VISTA128FB-24
VISTA-250BP -VISTA-250FBP - VISTA250FBP-24
- Fully supervised connection between control and radio
4204 Relay Emulation Mode
(Built In 2-4204 Selectable 1 Or 2 Built In To The Radio Relay Modules
Processed Through The Data Wires From The Keypad Data Bus.)
Panel Compatibility
- ADEMCO:
- VISTA 10SE REV-15 AND HIGHER
- VISTA 50P
- Simple 4 wire connection to the Vista control using the keypad bus.
- You Just Program The Alarm Panel Relay Outputs To Trigger The Selectable 1 Or 2-4204
Relay Emulation Zones Of The Radio. Total Of 7 Zones. Zone 8 is Reserved For Radio Tamper.
|
